| *** | A Museum quality working scale model of a beam engine English, circa 1940s in forged and turned steel and brass, mounted on a painted wooden stand applied with a plate inscribed 'R.A Barker / 1940 / Sheffield,' housed within a wooden framed glazed case,… | *** |  |
| *** | An engineer designed and hand built steam traction engine measuring 70 cm in length, 30 cm in width and 41 cm in height | *** |  |
| *** | A scale model of a plunger pump from the Lord Nelson gold mine, St Arnaud, Victoria in turned and forged steel and brass, mounted on an ebonised frame applied with a sterling silver shield inscribed 'Scale model / of famous / St. Arnaud's / Nelson Mine /… | *** |  |
| *** | A scratch built 3 1/2 inch gauge 0-4-2 live steam locomotive, 'Horatio' untested, with detailed cab and backhead fittings, vacuum hoses, handrails and steps, in green livery, with the name plate 'Horatio' to both sides, displayed on a section of track,… | *** |  |
| *** | A live steam stationary engine and boiler engine in turned and forged steel and brass, raised on a painted wooden stand bearing a brass plate inscribed 'Made by / A.E Smith / C.M.F V.R [Chief Mechanical Engineer Victorian Railways] / 1919-38,' on a wooden… | *** |  |
| *** | An engineer designed and hand built steam locomotive model of the 1838 0-6-2 LMR 57 'Lion' with display stand, model measuring 12 cm in width, 63 cm in length and 26 cm in height | *** |  |
| *** | An engineer designed and hand built vertical steam engine measuring 42 cm in height and base measuring 32 cm X 41 cm | *** |  |
| *** | A large scale mounted model train 'The model Engineer locomotive' unboxed, possibly scratch built, (deterioration in places), 55 cm long | *** |  |
| *** | An early vertical steam engine measuring 44 cm in height, 14 cm square cast base and 11.5 cm fly wheel | *** |  |
| *** | A Renown Australian model steam roller 105, boxed | *** |  |
| *** | A scratch built steam engine, demonstration model | *** |  |
| *** | Scratch built clockwork gauge 1 Gnr 0-6-2 special tank locomotive Australian, green livery, with brass maker's plate to base inscribed 'Concordia Works No. 5 N.S. Feb 1954'. Provenance: This locomotive was reputedly constructed at the former Concordia… | *** |  |
| *** | A live steam model of a Traction engine by David Auld, Greymouth, New Zealand, with original certificate and instructions, and an Unattributed live steam engine model | *** |  |
| *** | Scratch built wooden U-boat on secured stand, unboxed | *** |  |
| *** | A collection of Mamod steam engines including 2 X stationary engines and 1 steam tractor | *** |  |
| *** | A Bing stationary steam engine, circa 1907-1912 | *** |  |
| *** | A Fleischmann 125/4 steam engine | *** |  |
| *** | A live steam engine by Bing, circa early 20th century | *** |  |
| *** | Two steam Engines (SP2 and SP3) by Mamod, circa 1970s-80s (2) | *** |  |
| *** | A steam engine SP4 by Mamod, circa 1970s | *** |  |
| *** | A Scorpion Horizontal steam engine by model Engineering, made in Australia, circa 1948 | *** |  |
| *** | A live steam 'Donkey' engine by Bing, C. 1904 | *** |  |
| *** | Two Unattribited live steam engine models | *** |  |
| *** | Two steam Engines (SE2A and SP1) by Mamod, circa 1970s-80s (2) | *** |  |
| *** | A live steam engine model by Scorpion | *** |  |
| *** | Mamod TE1 live Traction engine in plain box with picture label 26 cm long | *** |  |