Full details of each lot are displayed, except the lot number, estimate and price. You must be a subscriber to view lot numbers, estimates and prices.

Click here to view registration and subscription levels

Collectable Surfboards, Part 2. — McKenzies Auctioneers

Auction House:McKenzies AuctioneersNumber of lots recorded:114
Sale Title:Collectable Surfboards, Part 2.Lots with images:110
Auction Location:PerthPrices available:111
Date:20-Oct-2015
***
Gordon Woods Single Stringer 9 feet 7 inches x 22 inches. Built in 1961, this board is in absolutely original condition and had one owner until purchased in 2010. Clear with blue competition stripes, with early raked fin. Signed by Gordon Woods. A fine example.
***
***
***
Greg Laurenson Single Fin This round tail board is 6 feet 8 inches long x 21.5 inches wide. Red in colour with Greg's dolphin logo, it is a great example. 1976.
***
***
***
Hansen by Gerry Lopez Shaped by master shaper Gerry Lopez when working for Hansen Surfboards. 7 feet 1.5 inches long x 21 inches wide. This single stringer, single fin, round tail is a good example of Gerry's work, circa 1972. Blue bottom with clear deck.
***
***
***
Hardy Single Fin Gun Pintail 7 feet x 20 inches. Shaped by Tony Hardy at Margaret River. Great condition.
***
***
***
Hollow Plywood Paddle/Surfboard '50s Australian crafted 'cigar box' type paddle- Surfboard. Original example of a multi-purpose hollow surf craft constructed of marine plywood and timber. 8 feet x 23 inches model, well-constructed using nails not screws, and a varnish finish. Solid timber keel type skeg and a bung in the tail. Often these plywood boards were built at boatbuilding yards between bigger jobs, and many were used as stand-up paddle surfboards, particularly in Victoria and South Australia. They…
***
***
***
Hollow Wooden Ply Okinui 7 feet 9 inches long. From the 40's with a wild and wacky 60's paint job.
***
***
***
Hollow wooden 'Toothpick' by Barry Jarrott and Stan Smith 16 feet 5 inches long overall. Made by Barry and Stan in 1960. Paddled in competition by Barry (Young Duke) Jarrott for Cottesloe Surf Club. Wooden Dowls to save weight. Excellent condition.
***
***
***
Hot Buttered Twin Fin 1975 model shaped by Frank Williams, measures 6 feet 3 inches x 19.5 inches and it's quite narrow in the tail with the fins really close together. Condition-7.5/10 Very similar to a few longer Hawaiian twinnies, except for the flyers. An interesting board with a cool spray job and the famous Hot Buttered logo.
***
***
***
Hot Stuff Allan Bryne Design A 5 feet 10 inches x 20 inches flyer rounded pin design by master shaper Al Bryne. Was a custom for Currumbin surfer Ray Sawtell, and dates from around 1978. It's a lightweight model from the Hot Stuff factory, where the Rabbit single fins were also produced during the late '70s. This is a total original one owner by one of the most respected surfer shapers in the country. Beautiful original timber and glass fin. Condition-8/10
***
***
***
Hot Stuff Peter Townend board 6 feet 6 inches x 20 inches. 1975. This is one of them that he has had signed over the last few years. Condition-8/10
***
***
***
Hot Stuff Single Fin Wayne Rabbit Bartholemew 6 feet 1 inches x 20 inches. Single fin round tail, ridden by Rabbit and signed by him. Very good condition.
***
***
***
Tom Hoy Precision Equipment Single Fin Shaped by Tom Hoy this single fin, channel bottom, with double flyers and a swallow tail has a stepped bottom around the fin area. One of Tom's Experimentals. 5 feet 11 1/2 inches x 21 inches. 1978.
***
***
***
Hoye Single Fin 6 feet 8 inches x 19 inches. 1973 Pintail, shaped by Tom Hoye when based at Yallingup. With Tom's Indian on horseback logo.
***
***
***
Jacko Single Fin Swallow Tail 6 feet 8 inches x 18.5 inches. 1973.
***
***
***
Jacko Single Stringer Thruster 6 feet x 21 inches. Flyer round tail. Mint condition. Circa 80's.
***
***
***
Joel Parkinson Kustom Competition Board 6 feet 1.5 inches long x 19 inches thruster. 2010 Ridden and signed by Joel Parkinson as one of his competition boards. Excellent condition.
***
***
***
Kaimanu 'Green' Board This board is environmentally friendly. Made from Bio foam, which is soy based. 100% hemp cloth with various weight ratios of 5.9ounce to 4.6ounce with low v.o.c. epoxy and finished with linseed bio resin. The hemp has a natural memory flex and is stronger in tensile strength and strength to weight ratio than that of fibreglass. 5 feet 10.5 inches long x 18 inches wide. Made by Chad Jackson. Attractive logo and is extremely light in weight.
***
***
***
Kiama Surfboards Mike David Designs Shaped by Billy Tollhurst Pintail single fin with flyers 7 feet 2 inches long x 19.5 inches. yellow with great design on bottom and logo on deck. Excellent condition.
***
***
***
Aragorn Pintail Single Fin 1975 Aragorn pintail from Kirra in Queensland. Shaped by Bill Robertson. 6 feet 10 inches x 19 inches it's a classic Kirra Point model. The overall condition is very good and could easily be improved on.
***
***
***
Klemm-Bell Pintail Single Fin 7 feet x 19 inches with flyers. Blue bottom with sunrise deck, circa 1975.
***
***