Full details of each lot are displayed, except the lot number, estimate and price. You must be a subscriber to view lot numbers, estimates and prices.
Collectable Surfboards, Part 2. — McKenzies Auctioneers
| Auction House: | McKenzies Auctioneers | Number of lots recorded: | 114 |
| Sale Title: | Collectable Surfboards, Part 2. | Lots with images: | 110 |
| Auction Location: | Perth | Prices available: | 111 |
| Date: | 20-Oct-2015 |
Lot: ***
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
Lot: ***
Farrelly early 1970 Single Fin. An original 1971 single fin by the great Midget Farrelly, Australian World Champion surfer. This 6 feet x 19 inches is one of the original 'S' deck shortboards from this important period In surfing history and would be right at home in any serious collection. This board is unrestored with only a few small dings that have been repaired, and it's straight with no delaminations, and with a hole in the fin for a legrope.
Estimate: ***
Price: ***
Lot: ***
Balsa Mal 9 feet 2 inches long x 20.5 inches. Circa 1958/59. All original one owner, unknown shaper/brand. Light blue pigment all over, red fin on tails edge
Estimate: ***
Price: ***
Lot: ***
Barry Bennett Squaretail A mid '70s single fin squaretail by the respected Sydney surf factory, Bennetts. 6 feet 8 inches x 19 inches. Has had a few dings repaired and is a bit brown on the bottom, but the deck still shows well.
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
Lot: ***
Bing Surfboards Made in America for the Australian market. 7 feet 10 inches long x 21.5 inches wide, 1969 This single stringer, pin tail single fin has the Bing logo with the kangaroo on one section. With the wave set fin box and large raked red fin, this is an unusual board. Whilst made for the Australian market it never left the American shores until recently.
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
Lot: ***
Bob Brown Single Fin Any fractures or dings have been repaired the old school way and the shape is by Rico., measures 6 feet x 19.5 inches and features fluted flyers and nice original fiberglass fin in the box, plus a fabulous period spray. 1976. Condition-this rates a healthy 8/10
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
Lot: ***
Brothers Neilsen Shaped by Rick Neilsen for their Surfers Paradise shop circa 1976., measures 6 feet 11 inches x 19 1/2 inches and is totally original and unrestored.
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
N/A
Lot: ***
Estimate: ***
Price: ***
Lot: ***
Cooper Single fin Swallow tail shaped by Richie West This is a great example of a mid 70s Cooper single fin shaped by American surfer Richie West, and it's a fine rider. Has West's interpretation of the concave bottom that was so successful in California's waves and still used by some of today's top shapers such as Dick van Straalen., measures 6 feet 6 inches x 20 inches with plenty of nose area. West's design was known as the Bullett Model and for good reason. Apart from the rails being touched up this is…
Estimate: ***
Price: ***
Lot: ***
Cordingley Red Stripe Mal Single fin, square tail 9 feet 6 inches long x 22 inches, red stripes with white band-1965. Good condition.
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
Lot: ***
DHD Stephanie Gilmore Competition Board 6 feet 5 inches long x 18 1/8 inches. Ridden by Steph during the 3rd World Title 2010. Thruster with pink deck grip, signed by Stephanie.
Estimate: ***
Price: ***
Lot: ***
DHD Swallow Tail shaped by Maurice Cole, Jake Paterson personal board Ridden by Jake in competition. This board is extremely light. Features the snake logo, crescent tail and thruster design. Length 5 feet 11 inches
Estimate: ***
Price: ***
Lot: ***
Estimate: ***
Price: ***
